Colibri-MDT 17 36008 Motorized turntable

Gear ratio: 40:1
Backlash: < 0.12°
Radial backlash: < 0.02mm
Axial run-out of the turntable: < 0.03mm
Permissible output torque M1: 1.2Nm
Permissible tilting moment M2: 1.8N
Max. input speed: 600 rpm

Colibri-MDT 17 36012 Motorized turntable

Colibri-L MDT17 36012-HP i=10 or i=45

incl. motor and positioning control BAC

Gear ratio: 10:1 o.45:1
Efficiency η: 0.69
Backlash: < 0.2°
Radial play: < 0.02mm
Axial run-out of the turntable: < 0.03mm
Perm. output torque M1: 3Nm
Perm. tilting moment M2: 3Nm
Max. input speed: 600 rpm

Motorized rotary table MDT23 360110 i20 or i40

without motor, with flange and coupling for Nema 23 stepper motor

Gear ratio: 20:1 or 40:1
Efficiency η: 0.33
Backlash: < 0.02° (20:1) / < 0.10° (40:1)
Radial play: < 0.02mm
Axial run-out of the turntable: < 0.02mm
Required input torque: 0.12 Nm for idling
Perm. Permissible output torque M1: 15Nm
Permissible tilting torque M2: 100Nm
Max. input speed: 600 rpm
Weight (without motor): 2.7 kg

Motorized rotary table MDT23 360150 i48

without motor, with flange and coupling for Nema 23 stepper motor

Gear ratio: 48:1
Efficiency η: 0.37
Backlash: < 0.1°
Radial backlash: < 0.02mm
Axial run-out of the turntable: < 0.02mm
Required input torque: 0.15 Nm for idling
Perm. Permissible output torque M1: 30Nm
Permissible tilting torque M2:200Nm
Max. input speed: 600 rpm
Weight (without motor): 6.4kg

MDT23 QN 360110 Motorized turntable without motor

Flange and coupling for Nema 23 stepper motor (6.35mm shaft)

Gear ratio: 2:1
Efficiency: 0.85
Backlash: < 0.2°
Axial run-out of the turntable:< 0.02 mm
Concentricity of the turntable: < 0.02mm
Required input torque: 0.12 Nm for idling
Permissible output torque M1: 10 Nm depending on the motor
Permissible tilting moment M2: 100 Nm
Max. input speed: 600 rpm

Sensor for MDT 17 36008 incl. 2m cable with angled plug

for determining the reference point
PNP normally open contact
Switching distance: 0.8mm
Connection type: M5x0.5

Sensor for MDT 36012, 360110, 360150 incl. 2m cable with angled plug
for determining the reference point
PNP normally open contact
Switching distance: 2mm
Connection type: M8x1

Chuck SPF-IUX-65-30-M2

For mounting on motorized rotary table MDT36012-HP

Spannfutter SPF-IUGO-125/3-1-M2

for mounting on motorized rotary table MDT360110-SG or MDT360150-SG

Concentricity: 0.1 mm

Clamping range: 3-125 mm

Through-hole: Ø35 mm

Outer diameter: Ø125 mm

Materials Cast iron

Version

including chuck key

1 set of interchangeable jaws

3 fixing screws

Spannfutter SPF-IUGO-160/3-1-M2

For mounting on the MDT360115-SG motorized rotary table.

Adapter for mounting SPF-IUGO 125/3-1-M2 on MDT36110-SG

Adapter for mounting SPF-IUGO 160/3-1-M2 on MDT360150-SG

Adapter for mounting SPF-IUX-65-30-M2 on MDT36012-HP

Sensor for MDT 36012, 360110, 360150 incl. 2m cable with angled plug
for determining the reference point
PNP normally open contact
Switching distance: 2mm
Connection type: M8x1